Nearly every house has a carpet as being a necessity, as carpets enable make the ground and household heat all seasons round. Carpets also are used as décor in many homes, as different colors and designs are great to look at. These carpets are susceptible to dust and other forms of dirt. Some stains are too stubborn to clean, and it may take ages before the stain can come off from your special mat. Although there are different techniques of cleaning carpets, special detergents and cleaning materials are required to make the cleaning exercise worthwhile. If you have been dealing with carpet stains and are still worried how they can become clean again, maybe it is time you tried carpet cleansing experts, continue reading.
Carpet Cleansing Techniques
Carpet absorbent technique: This is a method or technique applied when cleansing organic dirt and other materials that dissolve in water. The technique involves spraying water with solvents on the stained area, giving the mat or carpets some time to soak and dissolve the stain, then vacuuming the area. This technique consumes very little time, and the stains are effectively cleaned out in good time. In addition to this, drying time for carpets cleaned using this technique is very minimal too.
This is a cleaning technique employed for stubborn stains on specific parts of a carpet. It is a dry cleansing procedure where a rotating brush is employed to scrub off strains and dirt from specific areas of a carpet. Only a minimal amount of water is used in this cleaning procedure. It is successful for cleaning spots in a carpet that have stubborn stains. Special biodegradable detergents are however recommended when using this cleansing criterion.
Shampooing is a cleansing method where a shampoo solution is applied to clean carpets. Most carpet cleaners use two methods when cleaning with shampoo. There is the wet shampoo cleaning method where the carpet material is soaked in a shampoo solution, then vacuumed dry to remove dirt materials. Another shampooing method is the use of aerosol foam shampoo. With this method, shampoo is sprayed on the dirty carpet, after which the solution is allowed to dry. Vacuuming completes the cleansing method. One point to note when using shampoo is that, ammonia based shampoo may leave foul smell after the cleaning procedure.
This is the most common cleansing technique that most people use. It involves vacuuming the carpet to remove solid dirt materials from the carpet. When this is done, the carpet is subjected to pressurized hot steamy water to remove stains and other forms of dirt from the carpet. To better clean dirt from the carpet and make it look like new, one is required to first shampoo or spray some detergent on the carpet. The detergent is then allowed to work on dirt by dissolving and breaking down stubborn dirt materials from the carpet. The detergent is allowed around 15- 30 minutes to work on the dirt, and then steam cleaned. The water pressure and its hotness farther dissolve dirt for helpful removal.
Steam Star Carpet, Upholstery & Tile Cleaning
1a/802 Pacific Hwy, Gordon NSW 2072